Industrial Air Cooled Chiller for Plastic Injection Molding Machine

Air Cooled Chiller  for Plastic Injection Molding Machine

Features:

1.Imported high-quality compre8sors and imported water pumps are adopted, which are safe and quiet, energy-saving and durable.

2.Using a fully computerized temperature controller, simple operation, can accurately control the water temperature from 3℃ to 45℃.

3.The condenser and the radiator are unique in design, and the heat exchange effect is better.

4.There are current overload protection, high and low voltage control and electronic time delay safely device, when a failure occurs, an alarm will be issued in time and the cause of the failure will be displayed.

5.Built-In stainless steel heat preservation water tank. durable and easy to clean.

6.Equipped with reverse phase and under-phase protection and anti-icing protection.

7.The temperature of the ultra-low temperature chiller can reach below -60℃.

8.This series of chillers can be customized to be acid and alkali resistant

9.The air-cooled type adopts a finned condenser, which has fast heat conduction and good heat dissipation effect without providing cooling water. It can provide ice water at 5℃~45℃, and the low temperature type can be as low as 3℃ (the temperature dereference does not exceed 11℃).

the compressor power is from 3HP to 50HP, and the cooling capacity can reach 7800-128500Kcal/hr.